Kriega Haul Loop - Front

Front fender straps are essential equipment for extreme enduro events. Kriega’s unique design is a self-supporting/semi-rigid solution, which is always easy to find and use.

Features :

• There are 2 methods of fitting the front Haul Loop.
• Both use 2 x H-Duty cable ties.
• Undo web on the stainless buckles.
• Wrap the web around the fork leg, directly under the lower triple-clamp.
• Re-thread the stainless buckles(making sure to feed the web back through the buckle to 'lock' it off).
• The loose end can be placed under the elastic-loop provided.
• To prevent the Haul Loop moving down the fork leg/s you need to use a cable tie in 2 ways.
• The first method is to feed the cable tie through the small web-loop next to the stainless buckle. Connect the cable tie and tighten around the fork leg directly above the lower triple-clamp (this method is illustrated on the 'Haul Loop' page).
• Another method is to use 2 x cable ties linked together in a figure of eight behind the front light/number plastic (this method is shown on this page). The figure of eight method is a superior one, as you can fine tune the angle of the Haul Loop by decreasing the length/s of the cable ties.
• The shorter the tie the more elevated the Haul Loop will sit (see Works Series video).

Specifications :

• Semi-rigid design.
• Universal fit (front only).
• Ultra-tough construction.
• HYPALON: abrasion resistant re-enforcement.
• TOUGHTEK - grips wet or dry.
• Alloy buckles.